As-built documentation for Lead homes.
iLevel Construction handles as-built documentation for custom homes in Lead and across Lawrence County. High-country engineering for slope, snow load, and exposure, with a project manager on site weekly.
As-Built Documentation for the Lead market.
Lead is elevation, weather, and views that change the engineering math. The Homestake history is still written into the street grid and the architecture, and building here means respecting both the slope and the character of the place.
As-built documentation is the record of what your Lead home actually is, rather than what the drawings said it would be before the trades adjusted in the field.
We scan every framing and mechanical rough-in with 3D Vista before the walls close. That means the location of every stud, pipe, wire, and duct is recorded while it is still visible, and stays available when you want to hang something heavy, add a circuit, or remodel a decade from now.
The full scan and image set is delivered at closeout and is owned by the owner. It is your record of your house, not something you have to ask us for later.
Lead is 35 minutes from our Belle Fourche office. Our project manager is on Lead jobsites weekly at minimum, and more often during the phases that matter. Most of our owners build from out of state, so the whole process is built around remote visibility: a Ressio client portal with live schedule and budget, weekly updates, and 3D Vista scans of every framing and mechanical rough-in. You can watch the home come together without living down the road from it.
What gets recorded on a Lead build.
Lot character
Nearly all hillside, with a mining-era street grid that left some parcels narrow and steep.
Buyer profile
Retirement homes, second properties, and the occasional historic-area rebuild.
Weather and exposure
Roof framing commonly engineered to sixty-plus psf, with higher parcels above seventy.
Permitting
Lead has its own building department; rural parcels go through Lawrence County.
Scan coverage
Every framing and mechanical rough-in is scanned before the walls close, so what is behind the drywall stays visible after it is up.
Ownership at closeout
The full scan and image set is delivered at closeout and owned by the owner.
The drawings say what was intended. The scans say what was built.
One team, the whole home.
Documentation is part of the build itself on a Lead home, not an add-on.
What gets documented on a Lead build.
Scan at rough-in
Framing, plumbing, electrical, and mechanical rough-ins are scanned with 3D Vista before insulation and drywall, while everything is still visible.
Register to the plan
Scans are tied back to the drawings, so what was built and what was drawn can be compared directly rather than argued about.
Owner walkthrough
Out-of-state owners can walk the framing from anywhere and raise questions while changes are still inexpensive.
Closeout package
The full scan and image set is delivered at closeout and owned by you.
Long-term use
Years later, when you want to hang something heavy, add a circuit, or remodel, the record of your Lead home is still there.
You have far exceeded every builder I have worked with. Your attention to detail, your honesty, and your communication made this build smooth, even from afar.
What Lead owners ask first.
What makes building in Lead different from building in Spearfish?
Elevation and slope. Lead sits high enough that roof framing is commonly engineered to a 60-plus psf ground snow load, where a lower Spearfish lot may design to 40. Nearly every Lead lot is hillside, so retaining, drainage, and a slope-adjusted foundation are standard scope rather than exceptions. The mining-era street grid also leaves some parcels narrow and steep, which changes the access and staging plan before design even starts.
What is as-built documentation?
A record of what your home actually is, rather than what the drawings said before the trades adjusted in the field. We scan every framing and mechanical rough-in before the walls close, so the location of every stud, pipe, wire, and duct is recorded while it is still visible.
Do I get to keep the scans?
Yes. The full scan and image set is delivered at closeout and is owned by you. It is your record of your house.
Why does this matter after the build is done?
Because the questions arrive later. Where a pipe runs before you cut into a wall, where the blocking is before you hang something heavy, how the mechanical is laid out before a remodel. Those answers exist only if someone recorded them.
Is this an extra I have to pay for?
It is part of how we build rather than an upsell. Every framing and mechanical rough-in gets scanned before the walls close, and the set is delivered at closeout.
How far is Lead from your office?
About thirty-five minutes from our Belle Fourche office, which puts our project manager on Lead jobsites weekly at minimum and more often during the phases that matter.
How do I start a Lead project?
Call (605) 638-3040 or reach us through the contact page. The first conversation is usually about the parcel: what you own or are considering, and whether it supports what you have in mind at the number you have in mind.
From Belle Fourche, building across Lawrence County.
iLevel runs out of Belle Fourche, with custom home work in Lead and throughout Lawrence County. See our gallery for finished work across the Black Hills, or get in touch to talk through your lot.
Lawrence County overviewStart your Lead build.
Tell us about your land, your household, and the home you have in mind. Jason or someone on the team will be in touch to talk through what the lot will support. Call (605) 638-3040 or send us the details.
